凡來小店預約訂購安裝煞車來令片
就能"無料保養碟盤車削研磨"
微電腦控制車削研磨機 免費碟盤車削研磨
PRO - CUT
不限車種 碟盤直徑350mm內
底盤結構健康無間隙車輛
碟盤殘餘質夠厚 需有吃溝變型 異音也OK
或是高速煞車時 方向盤抖動現象
小店目前無限期 開放服務預約中....
PS.碟盤車削研磨不適用於每一部車 車主預約來店前 請先做基本斟酌
碟盤耗損嚴重者 或是碟盤厚度不夠 請先自己給自己一槍 "打槍"
或是預約來小店 由"老船長"來幫你檢視 給你最中肯的答案...
PS.小店也歡迎接受 任何車系車主
外購自備煞車來令片 做車削研磨後
可順道做更換 工資一邊酌收200元
PRO - CUT 微電腦自動校正 碟盤車削研磨286MM每片400300MM每片500315MM每片600 330MM每片600345MM每片700358MM每片800
| |
|
|
|
|
|
|
| |
| |
| |
|
|
| |
|
|
| |
|
|
|
|
| 各國知名車廠認證
The following manufacturers have either made Pro-Cut an essential tool for their dealers, or written technical service bulletins urging dealers to use the Pro-Cut lathe. The bulletins are available below.
BMW | 2004 - BMW approves Pro-Cut for warranty service | Chrysler/Dodge/Jeep) | 1996 - Chrysler releases new warranty bulletin naming Pro-Cut as preferred repair. 2003 - DaimlerChrysler names Pro-Cut a required tool for servicing Durango.
2006 - DaimlerChrysler names Pro-Cut a required tool for servicing Jeep.
2007 - DaimlerChrysler requires on-car machining for warranty service.
2008 - DaimlerChrysler begins enforcement of on-car machining for warranty service.
| Ford | 1998 - Ford delivers Pro-Cut brake lathes to every US and Canadian dealer. 2002 - Ford delivers lathes to every Australian and New Zealand dealer. 2009 - Ford Mexico approves and recommends only Pro-Cut for Mexican dealer network | General Motors | 2003 - GM names the Pro-Cut 9.2 as an essential tool for US and Canadian dealers. | Honda | 2007- Pro-Cut approved for dealer use in Canada (not published per request of Honda CAN) 2009- Recommended for India dealers | Hyundai | 1997 - Hyundai TSB 97-50-007 names Pro-Cut as recommended tool. | Jaguar | 2009 - Jaguar endorses Pro-Cut as recommended tool for dealers | Land Rover | 2009 - Land Rover endorses Pro-Cut as recommended tool for dealers | Nissan/Infiniti | 2004 - Pro-Cut named essential tool in US. 2005 - Pro-Cut named essential tool in Canada. 2009 - Infiniti names Pro-Cut on-car resurfacing as preferred repair method for eliminating shudder | Peugeot | 2001 - Peugeot names Pro-Cut for warranty repairs. | Porsche | 2004 - Approved for servicing Porsche 911. | Subaru | 1994 - Subaru picks Pro-Cut for dealers. 2003 - Subaru drop warranty time from 1.4 hrs to 1.0 hrs per axle. | Toyota/Lexus | 2002 - Pro-Cut approved for warranty service 2009 - On-car lathe required for 2007-2010 Camry warranty repair 2009 - Toyota policy strongly recommends on-car machining | VW | 2007 - Pro-Cut named recommended tool by VW | The following manufacturers approve the use of the Pro-Cut lathe by their dealers but have not written specific bulletins naming Pro-Cut. Ferrari | Approved | Isuzu | Approved | Kia | Approved | Mitsubishi | Approved | Saturn | Approved |
|
留言列表